iPhone Disassemble Steps/iPhone拆机步骤

iPhone Disassemble Steps/iPhone拆机步骤

Here we show you how to open the cover step by step, and change the LCD screen by yourself, Lets' do it now. 

Step 1 : Unscrew two five star screw on the bottom

Step 2:Remove the back cover(upward push to remove)

Step 3: Take cover,You can see the inside structure clearly

Step 4: Unscrem the battery screws first

Step 5:Pry the battery(No tool,can by hand)

Step 6: Remove the battery(Pull the middle of the film will pop up automatically)

Step 7: Take out the card slot

Step 8: Unscrew the iron screw

Step 9:Unplug the tail plug cable

Step 10: Unplug the Signal Antenna(No tool can by hands)

Step 11: Unscrew the main board crews

Step 12: Unscrew the WIFI cap crews

Step 13: Remove the WIFI cap

Step 14: Remove the rear camera

Step 15: Unscrew the screw on the middle of mail board

Step 16: Unplug the five interfaces cable under the WIFI cap(Especially do not pry into the mainboard resistors)

Step 17: Unscrew the slot on the main board

Step 18: Remove the main board

Step 19: Unscrew the ring screw

Step 20: Remove the ring

Step 21: Unscrew the vibrator screws

Step 22: Unscrew four bracket screws(on each corners)

Step 23: Unscrew the LCD screen  screws(Tatally 6 pcs)

Step 24:Remove he LCD screen

 

If you need any helps, Please contact us by following informations:

Email: sales@toptouchpanel.com

Tel: +86.755.28326071

Fax: +86,755.28326072